- EV tools
- EV route planner
- Peugeot e-Rifter
Trip planning · Peugeot e-Rifter
Peugeot e-Rifter route planner with charging stops
Pick a start and destination and the planner estimates the Peugeot e-Rifter's energy use over the real road route, then chooses charging stops from PlugSphere's worldwide station database — each with two nearby backups. The vehicle inputs below are already set for this car.
Plan a Peugeot e-Rifter trip
Useable battery
50 kWh
Energy use
21.3 kWh/100 km
Typical DC power
80 kW
Estimated range
235 km
A → B → charge
Plan a Peugeot e-Rifter trip on the map
Battery, consumption and charging power are pre-filled for the Peugeot e-Rifter — set two points and calculate. Adjust anything to match your exact variant.
Planning your trip
Building your road route
Following the available road network between A and B.
- Route
- Battery
- Charging
Road route
Distance and drive time between A and BBattery check
Charge, reserve and trip energyCharging plan
Stops and nearby backups, if needed- Road distance
- — Estimated road route
- Driving time
- — Before charging time
- Trip energy
- — Includes your buffers
- Without charging
- — Charge at destination
- Primary stops
- — Best-ranked options found
Your route plan
Recommended charging stops
Primary stops follow trip order. Open any option on the map to inspect its position.
Review A, B and your EV details, then calculate again.
Road-tripping a Peugeot e-Rifter — quick answers
How far can a Peugeot e-Rifter drive before stopping to charge?
Around 235 km in mixed driving from a full battery, but road trips rarely run 100% to 0% — with a 90% start and 10% reserve, plan segments of roughly 188 km, less in winter or at high motorway speeds.
How long are charging stops with a Peugeot e-Rifter?
The Peugeot e-Rifter typically sustains about 80 kW in a DC session, so a 10–80% stop takes roughly 26 minutes at a sufficiently powerful charger. The planner accounts for this when spacing stops.
Which chargers does the Peugeot e-Rifter use?
The Peugeot e-Rifter charges via Type 2 CCS — the planner is pre-filtered accordingly, and every suggested stop includes two nearby backups in case a charger is busy or offline.